Skip to content

10 Tips For A Sustainable Water Supply In Your City

Table of contents

8 min read

water supply

Water is an essential part of life. Today most of us take that fact for granted. We're finding ourselves fighting over water as the quality decreases. Water weighs heavy on our minds as the quantity becomes less than we need to sustain our growing population.

The truth is, our cities (and everything in it) depend on water. We all drink it and use it every day. In fact, according to the United States Geological Survey (USGS), about 70% of us drink tap water, and more than half take for granted that we have access to clean drinking water whenever we need it. Unfortunately, we have become so accustomed to this basic necessity we have failed to notice the strain.

Where to Start

where-to-start

Did you know that the average American uses more than 100 gallons of water per day? That's a lot of water, and it can be hard to figure out where to start when it comes to reducing your usage.

Luckily, there are plenty of ways to improve water usage without sacrificing life's simple pleasures.

Here are ten tips for making your city's water supply more sustainable:

  1. Check for leaks in your plumbing system. A tiny leak can waste thousands of gallons of water every year! The average American household loses about 10,000 gallons of water annually through leaky pipes, toilets, and faucets.

  2. Take shorter showers. A full-body shower only needs around 5 minutes to get clean!

  3. Turn off the tap while you brush your teeth or shave. You might think letting your water run while you brush your teeth or wash dishes is a harmless waste, but all those little drips add up over time! If you are not actively using water, turn off the tap completely. A tap running can fill 4 gallons per minute!

  • Don't use a hose to wash your car. Instead, use a bucket and sponge, and turn off the water while you wash your car. Wash your car on the lawn. Then the water will drain back into the ground. Use safe soaps to protect the groundwater and lawn.
  1. Run full loads in the dishwasher and washing machine. You'll use less energy and less water overall!

  2. Install low-flow aerators on all faucets and showerheads in your home. You'll use half as much water without missing out on any comfort! Faucet aerator to reduce flow rate by 25% - 50%

  3. Replace older toilets with models that use less than one gallon per flush. They're easy to install yourself! Low-flow toilets use less than 1.6 gallons per flush, significantly less than older models.

  4. Plant trees and gardens around your house so they can absorb rain.

  5. Collect rainwater.

rain-water

If you live in an area with rainy seasons, consider collecting some of that water in barrels. You can use it later to water your plants and other greenery around the house. It's a great way to ensure your plants stay healthy and vibrant without relying on city water supplies as much!

9. Recycle water in your home. It is easy to recycle water in your home.

  • Save shower water for plants and houseplants
  • Use a bucket under the faucet to catch dripping water

The Basics: Water Sources

Water is the lifeblood of our planet. It sustains every living thing. Therefore, it's important to take care of it and use it wisely. To do this, we need to understand where water comes from and how much of it we use. There are a few basic water sources, and they all have their own advantages and disadvantages.

Here are the most common:

  1. Surface water. This is the most common type of water source for cities. It comes from lakes, rivers, and streams. It can be used as drinking water or for other purposes like irrigation.

  2. Groundwater. This is underground water that seeps into underground aquifers and wells. It's not always clean enough to drink, but it can be used for irrigation or industrial purposes.

  3. Desalination. The process of removing salt from seawater so that it's safe for drinking or other uses.

desalination

You'll need to turn to surface water to make your city's water supply more sustainable. Surface water is any water that naturally flows on the Earth's surface. It is stored in lakes, ponds, rivers, or reservoirs.

The main benefit of using surface water is that it doesn't have to be treated before humans use it. It's also cheaper than using groundwater. This means it can be more affordable for cities looking to use it as their primary source of drinking water. However, this isn't without its drawbacks. Surface water tends to be more vulnerable than groundwater because it's exposed to the elements. As a result, it is at risk for bacteria or other contaminants that can harm humans who drink from it.

Surface water is usually stored in reservoirs for use and has a limited supply, so it's essential to ensure that you conserve it as much as possible.

The Precious Resource

It's no secret that water is a precious resource. So it's not just an issue of conserving it; we also need to ensure we're using it sustainably. That's why so many cities around the world are looking at how they can harness the power of groundwater to meet their water needs.

Groundwater

Groundwater is one of the most reliable water sources on Earth. This makes it an excellent choice for cities looking to reduce their reliance on surface water that might not be as reliable or accessible. However, groundwater can also be challenging to manage because you have to dig for it! This means that you'll need some specialized equipment if you want to get your city's supply from beneath the ground instead of from a lake or river.

Rainwater Harvesting

Rainwater harvesting is one way to ensure that your city's water supply is sustainable. It is a method of collecting rainwater that falls on rooftops, parking lots, and other impervious surfaces and storing it in tanks for later use. Rainwater harvesting reduces the amount of runoff into rivers and other bodies of water, which can cause flooding or pollution.

Rainwater harvesting has many benefits including:

  • Reduced demand for groundwater supplies
  • Less pollution in rivers and streams
  • Less need for costly infrastructure projects
  • Better quality drinking water

Rainwater harvesting is a great way to make your city's water supply more sustainable.

Harvesting rainwater is a practice that civilizations have used worldwide for thousands of years. It's also very easy to implement in cities.

Depending on the climate where you live, harvesting rainwater can take place throughout the year.

Desalinization

Many cities are looking for ways to make their water supply more sustainable, and desalinization is one of the most popular solutions. This is because it's easy to do, and you can use it to convert ocean water into drinkable water.

The desalination process has been around since the 1940s. However, it wasn't until recently that it became common enough for cities to start using it on a larger scale. The biggest advantage of desalination is it doesn't require any extra energy. The only thing you need is a desalination plant. This makes it very cost-effective compared to other methods like drilling wells or building reservoirs. In addition, no chemicals are involved in this process, so there is no risk of contamination from runoff or leaching into groundwater supplies. There are a lot of ways to make the water supply more sustainable. Desalinization is one of the most effective.

This process can be done in several different ways.

  • One way is to use solar power to run pumps and filters that remove the salt from seawater.
  • Another method is called forward osmosis. Here, pressure is applied to force seawater through a membrane that traps the salt while letting fresh water through.

Getting Your City's Water Supply to Be More Sustainable

pouring-water

In the past, it was possible to use only a single water source for your household. However, these days, that's not an option anymore. Even if you live in an area with plenty of precipitation and a large reservoir, you should be thinking about how to make your water supply more sustainable. Especially if yours is a growing city!

The first step towards this goal is knowing what kind of water you have access to and how much of it you can use. Next, you'll need to talk with local officials about what type of water treatment process is used in your town before deciding whether or not it will work for your needs.

If there are any ways you can use reclaimed water instead of drinking tap water or spring water, then that is definitely worth looking into! Reclaimed water is wastewater that has been treated. The water is treated using some sort of filtration system before being released back into nature as a non-potable (but still clean) liquid. So when it comes to getting your city's water supply more sustainable, one of the most important things you can do is take a close look at reclaimed water.

Reclaimed water is treated wastewater used for irrigation, toilet flushing, and industrial processes. It's also known as recycled water or gray water. It's not the same as drinking water, even though it may look similar!

This practice has been around since ancient times when people would use fresh water to grow crops and then collect runoff from those crops to use again. While we don't have any evidence that they were actively recycling their wastewater back then, we know it was used for irrigation in ancient China, and probably elsewhere.

Today, reclaimed water is used worldwide in places where there isn't enough freshwater available for drinking and other uses. In fact, about two billion people worldwide rely on recycled or untreated wastewater for their drinking needs. Some of this water comes from rivers or lakes full of animal waste. That sounds pretty gross, but just think about how much worse it would be if we didn't have this option!

All In This Together

Everyone can do their part to be more sustainable, and what better place to start than with your local water supply? Considering that approximately 71% of the Earth's surface is covered in water, it's safe to say that we need to be smart about managing our aquatic resources.

What works for one city might not work for another. Furthermore, what works today might not work two decades from now. Positive changes will continue to grow with time and innovation, which is already occurring globally. So take a look at the list above, and see if there are any ideas you can borrow that would help get your community's water supply on a more sustainable track.

To sum it all up, managing your city's water sources effectively is not just a matter of getting the cleanest water possible. It's also a matter of preparing yourself for water shortages and droughts. These choices impact our global environment. Achieving sustainability can be achieved; it just takes some time and effort. Hopefully, we could share some light on water sustainability! Now go out there and be smart about managing your city's drinking water!